Injured by an unsafe jobsite?
We hold property owners and contractors accountable.
Construction and industrial sites are constantly changing. Temporary walkways, stacked materials, open holes, and makeshift access routes can turn a routine day into a life-altering emergency. A missing guardrail, a dark stairwell, a poorly covered opening, or ice left on a loading area is all it takes for a worker to fall, be struck, or get crushed.
These are not “just accidents.” When a property owner, developer, general contractor, or site manager chooses speed over safety, ignores obvious dangers, or fails to control how people move through a jobsite, they can be held responsible. In many cases, you may have third-party premises liability claims in addition to workers’ compensation.
If a dangerous jobsite condition caused your injury or a loved one’s death, we work to find out why it existed, who knew about it, and why it wasn’t fixed before someone got hurt.
How Much Is Your Case Worth?
Why jobsite premises hazards are so dangerous
Unlike a typical slip-and-fall in a store or parking lot, jobsite hazards often exist in areas where people are carrying tools, moving materials, climbing, or working around heavy equipment. That means:
- Little or no time to react: – Falls and struck-by incidents happen in a split second, especially when a worker’s hands are full or their attention is on the task.
- Higher fall heights and forces: Open edges, trenches, shafts, and temporary structures increase the chance of serious trauma, not minor injuries.
- Multiple parties in control: Owners, developers, GCs, subcontractors, and property managers all have roles in keeping the site reasonably safe. When no one takes responsibility, hazards linger.
The result is often catastrophic: fractures, spinal cord and brain injuries, amputations, crush injuries, severe orthopedic trauma, and wrongful death.
Common Product and Design Defects
Premises cases on construction and industrial sites are about dangerous conditions on the property not just the tools being used. Some of the recurring patterns we see include:
Unprotected holes, shafts, and floor openings
Uncovered or poorly covered openings, missing guardrails around elevator shafts or stairwells, and temporary decks with cutouts left open → falls from height, crush injuries, and fatal trauma.
Unsafe walkways, stairs, and access routes
Broken or uneven stairs, loose treads, missing handrails, makeshift ramps, and cluttered walkways used for regular access → trips, slips, and falls while workers are carrying tools or materials.
Poor housekeeping and debris
Loose materials, cords, hoses, rebar, packaging, and construction debris left in walking paths, on scaffolds, or near edges → preventable trips, twisted falls, and impalement or laceration injuries.
Inadequate lighting and visibility
Dark stair towers, basements, parking decks, and temporary corridors with burned-out bulbs or no lighting at all → missed hazards, missteps at edges, and collisions with moving equipment.
Water, snow, ice, and drainage issues
Leaking roofs, standing water, unaddressed snow and ice at entrances, loading areas, and access roads → predictable slip hazards that should be treated, diverted, or cordoned off.
Traffic, staging, and site-logistics hazards
Poorly planned pedestrian routes near trucks, forklifts, or heavy equipment; blind corners; lack of barriers or signage → struck-by incidents, crush injuries, and pinned-between accidents.
Who may be responsible for a dangerous jobsite condition?
On a jobsite, responsibility for premises hazards can extend well beyond your direct employer. Depending on the facts, potentially responsible parties can include:
- Property owners and developers who retain control of the premises or dictate how the site is laid out and maintained
- General contractors and construction managers who coordinate trades, control access routes, and are supposed to identify and address site-wide hazards
- Subcontractors and trade contractors that create dangerous conditions (e.g., leaving openings unguarded, blocking exits, or piling debris in walkways)
- Property managers and facility operators at active plants, warehouses, or commercial buildings where construction or maintenance work is taking place
- Snow, ice, and maintenance contractors who fail to clear or treat surfaces they’re hired to maintain
- Security or logistics vendors who control gates, entrances, and traffic without adequate planning or protections
We examine contract language, site plans, safety programs, and day-to-day practices to determine who had control over the condition that hurt you and who failed to act.
How we investigate jobsite premises cases
Premises cases on jobsites move quickly. Hazards can be fixed overnight, debris removed, lighting replaced, and openings covered before anyone takes photos. We work to move faster. Our team:
- Secures photos, video, and physical evidence before the scene changes
- Visits and documents the site where feasible, including measurements, layout, and visibility studies
- Interviews witnesses and co-workers who saw the condition or reported it before the incident
- Obtains contracts, safety manuals, and inspection records to see who was supposed to inspect, maintain, or control the area
- Analyzes codes and standards (building codes, fire and life-safety, OSHA regulations, and industry best practices) that may apply to the hazard
- Identifies all potential third-party and premises liability claims, not just workers’ compensation
Our goal is to reconstruct what happened and show that the danger was foreseeable and preventable.
Learn More
Wrongful Death on a Jobsite: How Third-Party Claims Deliver Beyond Workers’ Comp Death Benefits
Losing a loved one in a workplace incident is devastating. In the immediate aftermath, most families are told, “workers’ comp will handle it.” While workers’ compensation death benefits are important, they are limited by design. In many jobsite tragedies, another…
Why Philadelphia Construction Cases Are Different: Union Trades, Dense Sites, and Complex Logistics
Construction in Philadelphia isn’t like construction everywhere else. Union trade structures, tight urban jobsites, and delivery/hoisting logistics create a web of responsibilities that can make or break a construction injury case. If you or a loved one was hurt on…
Electrocution & Arc Flash: LOTO, PPE, and Machine Guarding Gaps That Prove Negligence
Electrical work is dangerous when employers cut corners. When a worker suffers an electrocution, shock, or arc-flash burn, the root cause is often simple: the company failed to lock out energy, supply the right protective gear, or guard hazardous machinery.…
Disturbingly High Number of Hostile and Threatening Workplaces
A study of 3,066 U.S. workers found that nearly one in five employees face a hostile or threatening environment at work. The unemployment rate may be at a 16-year low in 2017, but the study indicates everything is not well…
