Cave-ins and Collapses:
We Prove What Went Wrong.
Open trenches, unstable soil, and compromised structures can turn routine work into lifeâchanging emergencies. A caveâin can bury a worker in seconds; a misâclassified soil cut can shear without warning; a utility strike can trigger fire, electrocution, or flooding; and an undermined footing can start a progressive collapse. These arenât âaccidentsâ when basic safeguards are skipped, rushed, or designed poorly.
When a contractor ignores protective systems, when a site pushes speed over safety, or when a product or shoring system is unsafe by design, people get hurtâand families are left to pick up the pieces. If that happened to you or your family, we move immediately to protect you.
How Much Is Your Case Worth?
Why these incidents are so dangerous
Even routine tasks turn highârisk when deep excavations, shifting soil, and nearby loads are involved. If basic safeguards slip for a moment, the consequences can be catastrophic.
- Seconds to collapse: Caveâins can bury workers before anyone can react.
- Hidden forces: Water, vibration, spoil piles, and adjacent loads add pressure you canât see.
- Chain reactions: A failed trench box, undermined footing, or weak shoring can trigger wider structural collapse.
Common accidents & injuries
These are the events we see most often. They happen in seconds and cause lifeâchanging harm.
- Trench caveâins from unprotected vertical cuts or improper sloping/benching
- Shoring or trench box failures due to improper installation, damaged equipment, or overloading
- Underground utility strikes (gas, electric, water, telecom) leading to fires, explosions, electrocution, or flooding
- Spoil pile/vehicle encroachment adding weight too close to the edge
- Structural/partial building collapses from excavation undermining or improper sequencing/demolition
- Falls into excavations from missing barricades or lighting
Resulting harm often includes crush injuries, asphyxiation, traumatic brain injury, spinal injuries, burns, amputations, and wrongful death.
Common Product and Design Defects
What this means for your case: we evaluate the protection system, plans, and equipment as sold and as used. If safer, practical protection was availableâor clear limits and instructions were missingâthat can support a product liability claim.
Weak or mismatched shoring systems
Components not rated for soil depth/type; mixed parts; worn pins; damaged panels
Improperly sized trench boxes
Boxes too short/narrow; gaps that allow sloughing; lack of spreaders
Defeatable or missing restraints
No means to prevent movement/float; anchoring points not provided
Poor access/egress design
No safe ladders within reach; slippery or blocked access
Inadequate guarding/barricades
Open edges without railings or covers; incomplete fencing in public areas
Confusing or missing instructions
No clear install sequence, inspection steps, or max depth/width charts
Equipment that encourages shortcuts
Heavy components without lift points; systems that are hard to inspect, leading to skipped checks
No âfailâsafeâ behavior
Systems that donât prevent use when parts are damaged/missing
Know Your Rights
Workers have the right to a workplace free from known hazards. Basic safeguards should be in place: protective systems for trenches over five feet (or less in unstable soil), a competent person on site, daily inspections especially after rain or vibration, safe access/egress, and barricades. When companies ignore these rules or when a manufacturer sells unsafe gear, you can hold them accountable.
Trenching & Excavation:
Added Risks
Service and excavation work are highârisk moments. We often see:
- No competent person conducting soil classification or daily inspections
- Improper sloping/benching for the soil conditions (Type C treated like Type B)
- Water in the trench from rain, groundwater, or broken lines with no dewatering plan
- Vibration & loads from trucks, cranes, and spoil piles too close to the edge
- Undermined structures or sidewalks without support; poor sequencing of demolition or excavation
- Lighting and traffic control missing in public rightsâofâway
These failures are preventable with disciplined planning, protection systems sized for the job, and realâtime inspections by someone with authority to stop work.
Learn More
Wrongful Death on a Jobsite: How Third-Party Claims Deliver Beyond Workersâ Comp Death Benefits
Losing a loved one in a workplace incident is devastating. In the immediate aftermath, most families are told, âworkersâ comp will handle it.â While workersâ compensation death benefits are important, they are limited by design. In many jobsite tragedies, another…
Why Philadelphia Construction Cases Are Different: Union Trades, Dense Sites, and Complex Logistics
Construction in Philadelphia isnât like construction everywhere else. Union trade structures, tight urban jobsites, and delivery/hoisting logistics create a web of responsibilities that can make or break a construction injury case. If you or a loved one was hurt on…
Electrocution & Arc Flash: LOTO, PPE, and Machine Guarding Gaps That Prove Negligence
Electrical work is dangerous when employers cut corners. When a worker suffers an electrocution, shock, or arc-flash burn, the root cause is often simple: the company failed to lock out energy, supply the right protective gear, or guard hazardous machinery.…
Disturbingly High Number of Hostile and Threatening Workplaces
A study of 3,066 U.S. workers found that nearly one in five employees face a hostile or threatening environment at work. The unemployment rate may be at a 16-year low in 2017, but the study indicates everything is not well…
